当前位置: 首页 > 落地箱 > 意大利Capriccio Continuo CC Submonitor MKIII 超低音

意大利Capriccio Continuo CC Submonitor MKIII 超低音

意大利Capriccio Continuo CC Submonitor MKIII 超低音

  • 本店售价：￥49800元
  • 商品点击数：32269

简单描述：全新正品保修


联系人：王先生 13715897113


联系地址：广东省汕头市珠江路创意大厦2楼

本店淘宝店：http://shop199139528.taobao.com/


意大利Capriccio Continuo CC Admonitor Submonitor MKIII超低音

有一定烧龄的发烧友要是第一次看见Admonitor和Submonitor组合,肯定会以为是瑞士名厂Ensemble又出了什么新产品,因为从外观上看,这一组合像极了Ensemble的Reference或PA-1加Profondo,而且外饰更加精致漂亮.可实际上,这是一个成立于1991年的意大利品牌,名为Capriccio Continuo…,这两个意大利单词都来源于音乐术语,相信本刊读者中的爱乐人都知道它们的意思,但连在一起,就不知如何译法,所以我们姑且简称其为CC.最后的3点,据说是商标不可或缺的一部分.

Preference做参考喇叭好一段时间了，一直想订低音柱，可是却没有货，没想到这一等却等到新款Submonitor MK III了，Submonitor MK III的设计就是要和CC的书架音箱搭配绝佳Capriccio Continuo CC Admonitor Submonitor MKIII超低音别看这是低音柱，本身也是1.5音路设计，其中有一个低音单元是全频段发声，另一个有高通滤波，而第三个单元则是被幅式单元，没有接线。Submonitor MK III使用新的单元，而不是前一代跑马场式椭圆单元，新低音单元采用奈米碳纤维振膜，低频延伸低到27Hz。

The Submonitor MKIII is the lower element of the Première/Admonitor 311 array.

This allows more accurate low frequency extension and headroom.
The Submonitor was designed to be integrated with the Admonitor Première/Admonitor 311 .
Visual impact has been optimised by the use of 3 pieces nanocarbon 165m drivers.
Low frequency extension is the result of the EAARR " Enhanced Active Auxilary Radiator Reflex" loading system.
The Submonitor is seamlessly integrated in the Admonitor Première/Admonitor 311 by the mutational "Transfer20Z" crossover technology.
Rather than beeing a generic subwoofer , the Submonitor 3 has been designed to blend seamlessly in the acoustic performance of the  Admonitor Premiere/Admonitor 311 , transforming these mini-monitors in full scale reference 3.5 way systems .
The transition between upper and lower module has been designed in such a way as to increase naturally the radiating surface to the lowest frequencies .
The objective was not simply to have "more bass" but to have all the subjective advantages that the best reproduction of the quasi-infrasonic spectrum can bring ; more complete tonal accuracy ; better "hall" and ambience perception ; higher dynamic headroom and ease on crescendos .
The 3 special 165 mm Nanocarbon woofers , with the very powerful and fast motors , optimise the specific piston surface versus physical impact of the Submonitor .
The technical driver parameters allow a surprisingly extended low frequency reach, even if performance has been subjectively adjusted for optimal pace and drive.
The crossover on the Submonitor 3 has 2 overlap points one for the lowest notes at 45 Hz and one at 95 Hz, for crossing over to the Premiere/Admonitor 311.
The top of the woofers is mainly used to increase the radiating surface of the AGTi midwoofer, by working in tandem with it, while the 2 lower woofers only work on the lowest 2.5 octaves.
The EAARR loading system , "Enhanced Active Auxilary Radiator Reflex" substitutes the passive radiator of the previous Submonitor with the 2 lower 165 mm units, that drive the traditional port in the same enclosure, to extract the best low frequency extension in compact enclosures.
The Submonitor 3 improves on the performance by upgrading the vent solution towards a quasi-aperiodic  “laminar flow” type .
This allows for a “faster”, better defined, reproduction of the lowest fundamentals. Also further the spurious noises, associated with airflow, are reduced.
Due to the complexity of low frequency room interactions, for optimisation purposes, it is possible to interface the Admonitor and Admonitor Preference in different ways to the Submonitor :
- Using the upper modules with the internal crossover ( high pass ) of the Submonitor.
- Using the upper modules in "Bi-Wiring" fashion, by driving the tweeter input separately.
- Using the upper and lower modules in passive "Bi-Amping", by using a dedicated “termination dongle” on the Submonitor 3 satellite output.
- Using the upper and lower modules in active "Bi-Amping" , with a low level passive crossover ( soon to be released ).
Care should be taken in positioning the Submonitor 3 + Premiere/Admonitor 311 in the listening room.
Placing the units in the corners, except special cases, is not recommended.
It is preferred to have the systems at  least 1 meter from the lateral walls and 0.5 meters from the back wall.
Help and advice from your dealer will be important.
System: EAARR loading, compact low frequency extension module.
Drivers:3 pieces 165 mm, high force, high excursion Nanocarbon units.
Sensitivity : 88db/2.83V/m
Frequency Range : 27 Hz - 135 Hz
Recommended Amplifier Power : 25W to 200 W
Crossover : 1st order high pass and 1st + 3rd order mutational "Transfer20Z" crossover technology low pass, nominal 45 Hz and 95 Hz
Dimensions : 748 mm high , 185 mm wide and 415.4 mm deep

看了又看